Disclaimer

Every effort has been made to insure the accuracy of product data and cross reference information. Design changes may result in different operating characteristics or dimensional changes from one manufacturer to another. Therefore, Packard cannot accept responsibility for the ultimate selection. For additional information, please contact Packard

×
*Disclaimer                            Use the Product Selector Tool

ICM MOTOR PROTECTION CONTROL

  • Protects against over and under voltage, and rapid short cycling caused by transient faults and power interruptions
  • Easy-view, backlit digital display
  • RMS voltage monitoring
  • Adjustable voltage set point
  • Adjustable over voltage setting
  • Adjustable under voltage setting
  • Adjustable anti-short cycle time delay
  • Adjustable response time
  • Control mode
  • 5-fault memory
  • Universal line voltage input
  • Heavy duty SPDT relay output
  • Universal control voltage input (for integrating a thermostat)
  • User adjustable settings:
  • Voltage set point: 80-300 VAC
  • Anti-short cycle time delay: 0-720 sec.
  • Over voltage setting: 5-25%
  • Under voltage setting: 5-25%
  • Control mode: On and Off
  • Response time: 0.1-10 seconds
  • Inputs:
    • Line voltage: 80-300 VAC
    • Frequency: 50-60 Hz
    • Accuracy: ±2%
    • Low power consumption:
    • Maximum 50 mA @ 120V
    • Maximum 100 mA @ 240V
    • Control voltage: 24-240 VAC
  • Output:
    • Type: Dry relay contacts
    • Form: SPDT
    • Relay contact ratings:
    • N.C. contacts: 10A resistive @ 277 VAC
    • N.O. contacts: 10A resistive @ 277 VAC
Time Delay 0 - 720 sec.
Control Voltage 24 - 240 VAC
Type Dry relay contacts
Set Point 80 - 300 VAC
Frequency 50 - 60 Hz
Dimension (In.) Length x Width x Height 3” x 3.2” x 1.35”
N.O. (Normally Open) 10A resistive @ 277 VAC
N.C. (Normally Closed) 10A resistive @ 277 VAC
Wagner DSP-1
Diversitech DSP-1

Item ID : ICM ICM492